Tags: monitor

How to change the recording interval for Cardiotech & Edan patient monitors Identify there parameters that you would like set set according to the patients needs […]

How to change the recording interval for GT-900/M3 vital sign monitors To change the recording interval goto NIBP > NIBP Set-up and configure time intervals to […]

How to connect/turn on the recorder for GT-900/M3 vital sign monitors Check that the printer module is on To turn the printer module on goto menu […]

How to fix continuous printing for GT-300 and SE-1200 EKG machines Ensure the EKG is set-up on ‘Auto’ To set up on ‘auto’ locate the “mode” […]

Leads are connected but no readings are being displayed Readings will not be displayed if the following are not set up properly or damaged:  Check to […]

  To install your paper, make sure that the very first sheet of paper on the top is the red grid facing up To the left, […]

How to Set the Pitch Tone Through the SpO2 Sensor On Any CardioTech Patient Monitor On the main display, click into the ECG section to bring […]

How to Install a Printer on the iM8 Patient Monitor     You will need a printer, paper, a phillips, a very small flathead, and 2 […]

How to Fix the “Loose Cuff” Error on a M3 Vital Sign Monitor 1) Check the age parameters on the display banner on the top of […]

How To : Install Plate on Any CardioTech or Edan Monitor         How to install a plate on an M3 You will need […]